Working With Woods: Tips And Tricks

Woodworking can be a great hobby for people from all walks of life. Whether you are an expert, or are just getting started, there is always something new for you to learn about the woodworking skill. If you like to learn more about this hobby you should read the article that follows below for some great advice.

When you are working with wood, safety must be the number one priority. Always start a job with the proper safety gear and follow instructions for using the tools properly. Do not remove any safety guards from tools because they are there for your protection. The last thing you want to do is end up at the emergency room because of an accident.

You can use tape to catch excess glue. If you want to prevent oozing glue stains along joints, try clamping pieces together without using any glue. You just put tape on your joint, and then cut along it using a sharp blade. Separate your pieces, and then apply glue. After that, clamp them to each other again. Your glue will ooze on the tape instead of the wood. You can peel off the tape before your glue dries.

Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.

Use some affordable filters for collecting fine dust. The filters and micro-filtering bags made to catch this dust can get pricy after several replacements. Try using the ones that are sold for use in household vacuums.
You can buy the cheap ones and easily modify them to fit your shop vacuum. Cut off the top a bit past the small opening. Turn the whole thing inside out so that airflow still flows in the usual direction. Slip it over your foam filter using the retaining ring to keep it in place.

If you are working with wood, it can be very dangerous to have a messy workshop. Do everything you can to keep your work area clean and well-maintained. Every time you are done with a specific tool, out it away before you get another. It may seem like this is time consuming, but you won’t have any reason to clean up later.

Make sure that you are wearing the appropriate protective gear when you are working on your woodworking projects. Your safety is of primary importance. Eye protection can protect your eyes from flying wood debris. A pair of strong gloves can protect your hand from splinters. Make sure that you have these essentials before you start on any projects.

As you read at the beginning of this article, there is so much that you can learn about woodworking that you will never know everything. However, even though that is a fact, there is no reason to not try. Now that you read this article you know a little more, and continuing to learn will only lead you to being a better woodworker.